Sold online only. Stock levels are inclusive of 5 different warehouses around Australia. Our service office located in Paradise (SA) does not hold stock. Pickups from our service office only available if prearranged.

Kingston 8GB (1x8GB) DDR4 RDIMM 2666MHz CL19 1.2V ECC Registered ValueRAM 1Rx8 1G x 72-Bit PC4-2666 Server Memory

$138.60 inc GST

Kingston 8GB (1x8GB) DDR4 RDIMM 2666MHz CL19 1.2V ECC Registered ValueRAM 1Rx8 1G x 72-Bit PC4-2666 Server Memory

SKU: MEKSD4R1X8G26C19 Categories: ,

5 in stock

SKU: MEKSD4R1X8G26C19 Categories: ,

Kingston 8GB (1x8GB) DDR4 RDIMM 2666MHz CL19 1.2V ECC Registered ValueRAM 1Rx8 1G x 72-Bit PC4-2666 Server Memory

Kingston’s KSM26RS8/8MEI is a 1G x 72-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM) registered w/ parity, 1Rx8, ECC, memory module, based on nine 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

Features:
• Power Supply: VDD = 1.2V
• VDDQ = 1.2V
• VPP = 2.5V
• VDDSPD = 2.25V to 2.75V
• Functionality and operations comply with the DDR4 SDRAM datasheet
• 16 internal banks
• Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for
the banks in the same or different bank group accesses are available
• Data transfer rates: PC4-2666, PC4-2400, PC4-2133, PC4-1866, PC4-1600
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Supports ECC error correction and detection
• On-Die Termination (ODT)
• Temperature sensor with integrated SPD
• This product is in compliance with the RoHS directive.
• Per DRAM Addressability is supported
• Internal Vref DQ level generation is available
• Write CRC is supported at all speed grades
• CA parity (Command/Address Parity) mode is supported

Additional information

Weight 0.03 kg
Dimensions 100 × 10 × 10 mm